MOD-PRV-AE-1100-EMB
ISO 14122-3 / NF E85-015 - H.1100 - top-mounted - pultruded GRP - 1 ergonomic handrail + 1 kneerail + 1 toe-plate + 6 connectors (2 handrail + 2 kneerail + 2 toe-plate) - 316 stainless steel bolts and rivets - civil work
ISO 14122-3 / NF E85-015 - H.1100 - top-mounted - pultruded GRP - 1 ergonomic handrail + 1 kneerail + 1 toe-plate + 6 connectors (2 handrail + 2 kneerail + 2 toe-plate) - 316 stainless steel bolts and rivets - civil works fixing not included
To comply with the standards, follow the recommendations on the drawing: ID - F 0273
MOD-PRV-AI-1100-EMB
ISO 14122-3 / NF E85-015 - H.1100 - top-mounted - pultruded GRP - 1 ergonomic handrail + 1 kneerail + 1 toe-plate + 6 connectors (2 handrail + 2 kneerail + 2 toe-plate) - 316 stainless steel bolts and rivets - civil work
ISO 14122-3 / NF E85-015 - H.1100 - top-mounted - pultruded GRP - 1 ergonomic handrail + 1 kneerail + 1 toe-plate + 6 connectors (2 handrail + 2 kneerail + 2 toe-plate) - 316 stainless steel bolts and rivets - civil works fixing not included
To comply with the standards, follow the recommendations on the drawing: ID - F
POT-PRV-PF-1100-EMB
H.1100 - pultruded profile 50x50x5 - for guard-rails with flat bar rails only - top-mounted - 3-hole GRP base + 316L stainless steel fixings included - civil works fixing not included
To comply with the standards, follow
H.1100 - pultruded profile 50x50x5 - for guard-rails with flat bar rails only - top-mounted - 3-hole GRP base + 316L stainless steel fixings included - civil works fixing not included
To comply with the standards, follow the recommendations on the drawing: ID - F 0287
POT-PRV-DEB-1100-EMB
H.1100 - pultruded profile 50x50x5 - with through holes (intermediate post) - top-mounted - 3-hole GRP base + 316L stainless steel fixings included - civil works fixing not included
To comply with the standards, follow t
H.1100 - pultruded profile 50x50x5 - with through holes (intermediate post) - top-mounted - 3-hole GRP base + 316L stainless steel fixings included - civil works fixing not included
To comply with the standards, follow the recommendations on the drawing: ID - F 0209
POT-PRV-BOR-1100-EMB
H.1100 - pultruded profile 50x50x5 - with blind holes (end post) - top-mounted - 3-hole GRP base + 316L stainless steel fixings included - civil works fixing not included
To comply with the standards, follow the recommen
H.1100 - pultruded profile 50x50x5 - with blind holes (end post) - top-mounted - 3-hole GRP base + 316L stainless steel fixings included - civil works fixing not included
To comply with the standards, follow the recommendations on the drawing: ID - F 0210
RDL-PRV-25-BL
GRP rod Ø16 L.100 - for kneerail Ø25 ext. / Ø18 int. - 2 rivets in 316L stainless steel - drilling to be done on site
For installation, refer to the drawing: ID - F 0274
GRP rod Ø16 L.100 - for kneerail Ø25 ext. / Ø18 int. - 2 rivets in 316L stainless steel - drilling to be done on site
For installation, refer to the drawing: ID - F 0274
RAL-PLA-25-GR
For kneerail Ø25 ext. / Ø18 int. - plastic connector + stainless steel assembly screw + 2 rivets in 316L stainless steel - drilling to be done on site
For installation, refer to the drawing: ID - F 0285
For kneerail Ø25 ext. / Ø18 int. - plastic connector + stainless steel assembly screw + 2 rivets in 316L stainless steel - drilling to be done on site
For installation, refer to the drawing: ID - F 0285
RAP-INX-ID
316L stainless steel joining bracket - compatible with idréva toe-plate only - 2 rivets in 316L stainless steel - match drilling to be done on site
For installation, refer to the drawing: ID - ST 0027
316L stainless steel joining bracket - compatible with idréva toe-plate only - 2 rivets in 316L stainless steel - match drilling to be done on site
For installation, refer to the drawing: ID - ST 0027
RDP-INX-ID
316L stainless steel joining plate - compatible with idréva toe-plate only - 4 rivets in 316L stainless steel - match drilling to be done on site
For installation, refer to the drawing: ID - ST 0028
316L stainless steel joining plate - compatible with idréva toe-plate only - 4 rivets in 316L stainless steel - match drilling to be done on site
For installation, refer to the drawing: ID - ST 0028
RAM-PLA-ERGO-GR
Plastic connector, adjustable angle 90°-270° - 4 rivets in 316 stainless steel - match drilling to be done on site
For installation, refer to the drawing: ID - ST 0035
Plastic connector, adjustable angle 90°-270° - 4 rivets in 316 stainless steel - match drilling to be done on site
For installation, refer to the drawing: ID - ST 0035
RDM-PRV-ERGO-GR
GRP square tube 50x50 L.100 - 4 rivets in 316L stainless steel - match drilling to be done on site
For installation, refer to the drawing: ID - F 0004
GRP square tube 50x50 L.100 - 4 rivets in 316L stainless steel - match drilling to be done on site
For installation, refer to the drawing: ID - F 0004
EMM-PRV-ERGO
GRP square tube 50x50x50 + black HDPE end cap - fitted in the workshop - 2 rivets in 316L stainless steel - match drilling to be done on site
For installation, refer to the drawing: ID - U 0002
GRP square tube 50x50x50 + black HDPE end cap - fitted in the workshop - 2 rivets in 316L stainless steel - match drilling to be done on site
For installation, refer to the drawing: ID - U 0002
EMB-PRV-PRO-3T-7047
For 50x50 square post only - 3 M13 fixings - 316L stainless steel adjusting screws for levelling - grey GRP RAL 7047
For installation, refer to the drawing: ID - ST
For 50x50 square post only - 3 M13 fixings - 316L stainless steel adjusting screws for levelling - grey GRP RAL 7047
For installation, refer to the drawing: ID - ST
PRT-PRV-725-1018-EMB
H.1100 - clear width 725 - top-mounted - yellow GRP RAL 1018 - 2 self-closing TruClose® hinges + 1 stop in passivated 316L stainless steel - 316 stainless steel bolts included
To comply with the standards, follow the rec
H.1100 - clear width 725 - top-mounted - yellow GRP RAL 1018 - 2 self-closing TruClose® hinges + 1 stop in passivated 316L stainless steel - 316 stainless steel bolts included
To comply with the standards, follow the recommendations on the drawing: ID - F
PRT-PRV-725-7047-EMB
H.1100 - clear width 725 - top-mounted - grey GRP RAL 7047 - high-visibility yellow handrail - 2 self-closing TruClose® hinges + 1 stop in passivated 316L stainless steel - 316 stainless steel bolts included
To comply wi
H.1100 - clear width 725 - top-mounted - grey GRP RAL 7047 - high-visibility yellow handrail - 2 self-closing TruClose® hinges + 1 stop in passivated 316L stainless steel - 316 stainless steel bolts included
To comply with the standards, follow the recommendations on the drawing: ID - F 0153
PMU-PRV-800-JN
L.800 - high-visibility yellow - side-mounted on a wall or guard-rail post - anchors not included
(For assembly, see technical document F 0001)
L.800 - high-visibility yellow - side-mounted on a wall or guard-rail post - anchors not included
(For assembly, see technical document F 0001)
PDE-PRV-1100-GR
H.1100 - 2 high-visibility yellow handles on a grey GRP frame - fixed on a base - 316 stainless steel bolts included - stud anchors not included
(For assembly, see technical document F 0269)
H.1100 - 2 high-visibility yellow handles on a grey GRP frame - fixed on a base - 316 stainless steel bolts included - stud anchors not included
(For assembly, see technical document F 0269)
PSE-PRV-1100-GR
H.1100 - 1 high-visibility yellow handle on a grey GRP frame - fixed on a base - 316 stainless steel bolts included - stud anchors not included
(For assembly, see technical document F 0009)
H.1100 - 1 high-visibility yellow handle on a grey GRP frame - fixed on a base - 316 stainless steel bolts included - stud anchors not included
(For assembly, see technical document F 0009)
RML-PRV-7047
Kneerail end fixing against a wall - GRP RAL 7047
For installation, refer to the drawing: ID -
Kneerail end fixing against a wall - GRP RAL 7047
For installation, refer to the drawing: ID -
RMM-PRV-7047
Ergonomic handrail end fixing against a wall - GRP
For installation, refer to the drawing: ID -
Ergonomic handrail end fixing against a wall - GRP
For installation, refer to the drawing: ID -
PL-15012,5-6000-JAUNE
Made by pultrusion with a protective surface veil.
70% glass fibre, 30% isophthalic polyester resin.
Length tolerance: 0/+10/+20 mm.
Coloured right through
Sold per length
Note: the RAL shade may vary from one productio
Made by pultrusion with a protective surface veil.
70% glass fibre, 30% isophthalic polyester resin.
Length tolerance: 0/+10/+20 mm.
Coloured right through
Sold per length
Note: the RAL shade may vary from one production run to the next.
PL-15012,5-6000-GRIS-7047
Made by pultrusion with a protective surface veil.
70% glass fibre, 30% isophthalic polyester resin.
Length tolerance: 0/+10/+20 mm.
Coloured right through, grey RAL 7047
Sold per length
Note: the RAL shade may vary fro
Made by pultrusion with a protective surface veil.
70% glass fibre, 30% isophthalic polyester resin.
Length tolerance: 0/+10/+20 mm.
Coloured right through, grey RAL 7047
Sold per length
Note: the RAL shade may vary from one production run to the next.
TC-2518-6000-GRIS-7047
Made by pultrusion with a protective surface veil.
70% glass fibre, 30% isophthalic polyester resin.
Length tolerance: 0/+10/+20 mm.
Coloured right through - grey RAL 7047
Sold per length
Note: the RAL shade may vary fr
Made by pultrusion with a protective surface veil.
70% glass fibre, 30% isophthalic polyester resin.
Length tolerance: 0/+10/+20 mm.
Coloured right through - grey RAL 7047
Sold per length
Note: the RAL shade may vary from one production run to the next.
TC-2518-6000-JAUNE
Made by pultrusion with a protective surface veil.
70% glass fibre, 30% isophthalic polyester resin.
Length tolerance: 0/+10/+20 mm.
Coloured right through
Sold per length
Note: the RAL shade may vary from one productio
Made by pultrusion with a protective surface veil.
70% glass fibre, 30% isophthalic polyester resin.
Length tolerance: 0/+10/+20 mm.
Coloured right through
Sold per length
Note: the RAL shade may vary from one production run to the next.
MC-5059-6000-GRIS-7047
Made by pultrusion with a protective surface veil.
70% glass fibre, 30% isophthalic polyester resin.
Length tolerance: 0/+10/+20 mm.
Coloured right through - grey close to RAL 7047
Sold per length
Note: the RAL shade ma
Made by pultrusion with a protective surface veil.
70% glass fibre, 30% isophthalic polyester resin.
Length tolerance: 0/+10/+20 mm.
Coloured right through - grey close to RAL 7047
Sold per length
Note: the RAL shade may vary from one production run to the next.
TK-5050-6000-7047
Made by pultrusion with a protective surface veil.
70% glass fibre, 30% isophthalic polyester resin.
Length tolerance: 0/+10/+20 mm.
Coloured right through
Sold per length
Note: the RAL shade may vary from one productio
Made by pultrusion with a protective surface veil.
70% glass fibre, 30% isophthalic polyester resin.
Length tolerance: 0/+10/+20 mm.
Coloured right through
Sold per length
Note: the RAL shade may vary from one production run to the next.
TK-5050-6000-JAUNE
Made by pultrusion with a protective surface veil.
70% glass fibre, 30% isophthalic polyester resin.
Length tolerance: 0/+10/+20 mm.
Coloured right through
Sold per length
Note: the RAL shade may vary from one productio
Made by pultrusion with a protective surface veil.
70% glass fibre, 30% isophthalic polyester resin.
Length tolerance: 0/+10/+20 mm.
Coloured right through
Sold per length
Note: the RAL shade may vary from one production run to the next.
