Ladders
Hatches
Guard-rails
Fall protection gridsLadders, hatches, guard-rails and fall protection grids in composite, designed and made in Normandy. Standards and applications freely available; data sheets, prices and estimates in your pro portal.
GRP rod Ø16 L.100 - for kneerail Ø25 ext. / Ø18 int. - 2 rivets in 316L stainless steel - drilling to be done on site For installation, refer to the drawing: ID - F 0274
For kneerail Ø25 ext. / Ø18 int. - plastic connector + stainless steel assembly screw + 2 rivets in 316L stainless steel - drilling to be done on site For installation, refer to the drawing: ID - F 0285
316L stainless steel joining bracket - compatible with idréva toe-plate only - 2 rivets in 316L stainless steel - match drilling to be done on site For installation, refer to the drawing: ID - ST 0027
316L stainless steel joining plate - compatible with idréva toe-plate only - 4 rivets in 316L stainless steel - match drilling to be done on site For installation, refer to the drawing: ID - ST 0028
Plastic connector, adjustable angle 90°-270° - 4 rivets in 316 stainless steel - match drilling to be done on site For installation, refer to the drawing: ID - ST 0035
GRP square tube 50x50 L.100 - 4 rivets in 316L stainless steel - match drilling to be done on site For installation, refer to the drawing: ID - F 0004
GRP square tube 50x50x50 + black HDPE end cap - fitted in the workshop - 2 rivets in 316L stainless steel - match drilling to be done on site For installation, refer to the drawing: ID - U 0002
H.1290 - pultruded profile 50x50x5 - with blind holes (end post) - side-mounted - bottom Teflon insert included - civil works fixing not included To comply with the standards, follow the recommendations on the drawing: I
H.1290 - pultruded profile 50x50x5 - with through holes (intermediate post) - side-mounted - bottom Teflon insert included - civil works fixing not included To comply with the standards, follow the recommendations on the
H.1300 - pultruded profile 50x50x5 - for guard-rails with flat bar rails only - fasteners for 4 flat bar rails included - fixing to the support not included To comply with the standards, follow the recommendations on the
H.1280 - pultruded profile 50x50x5 - with blind holes (end post) - mounted on U150 walkways only - bottom Teflon insert included To comply with the standards, follow the recommendations on the drawing: ID - F 0216
H.1280 - pultruded profile 50x50x5 - with through holes (intermediate post) - mounted on U150 walkways only - bottom Teflon insert included To comply with the standards, follow the recommendations on the drawing: ID - F
Pre-drilled PE 500 35x40 L.150 - reinforcement for 50x50 GRP guard-rail post, for side-mounted installation For installation, refer to the drawing: ID -
L.800 - high-visibility yellow - side-mounted on a wall or guard-rail post - anchors not included (For assembly, see technical document F 0001)
H.1100 - 2 high-visibility yellow handles on a grey GRP frame - fixed on a base - 316 stainless steel bolts included - stud anchors not included (For assembly, see technical document F 0269)
H.1100 - 1 high-visibility yellow handle on a grey GRP frame - fixed on a base - 316 stainless steel bolts included - stud anchors not included (For assembly, see technical document F 0009)
Finned HDPE plug - for kneerail with 3-5 mm wall For installation, refer to the drawing: ID -
Kneerail end fixing against a wall - GRP RAL 7047 For installation, refer to the drawing: ID -
Ergonomic handrail end fixing against a wall - GRP For installation, refer to the drawing: ID -
OneBloc™H.1100 - clear width 725 - side-mounted - pultruded grey GRP RAL 7047 - ISO 14122-3 / NF E85-015 - 2 self-closing hinges + 1 composite stop To comply with the standards, follow the recommendations on the drawing: ID - F
OneBloc™H.1100 - clear width 725 - walkway-mounted only - pultruded grey GRP RAL 7047 - ISO 14122-3 / NF E85-015 - 2 self-closing hinges + 1 stainless steel stop + 2 posts on bases with Delrin insert To comply with the standards
Made by pultrusion with a protective surface veil. 70% glass fibre, 30% isophthalic polyester resin. Length tolerance: 0/+10/+20 mm. Coloured right through Sold per length Note: the RAL shade may vary from one productio
Made by pultrusion with a protective surface veil. 70% glass fibre, 30% isophthalic polyester resin. Length tolerance: 0/+10/+20 mm. Coloured right through, grey RAL 7047 Sold per length Note: the RAL shade may vary fro
Made by pultrusion with a protective surface veil. 70% glass fibre, 30% isophthalic polyester resin. Length tolerance: 0/+10/+20 mm. Coloured right through - grey RAL 7047 Sold per length Note: the RAL shade may vary fr
Made by pultrusion with a protective surface veil. 70% glass fibre, 30% isophthalic polyester resin. Length tolerance: 0/+10/+20 mm. Coloured right through Sold per length Note: the RAL shade may vary from one productio
Made by pultrusion with a protective surface veil. 70% glass fibre, 30% isophthalic polyester resin. Length tolerance: 0/+10/+20 mm. Coloured right through - grey close to RAL 7047 Sold per length Note: the RAL shade ma
Made by pultrusion with a protective surface veil. 70% glass fibre, 30% isophthalic polyester resin. Length tolerance: 0/+10/+20 mm. Coloured right through Sold per length Note: the RAL shade may vary from one productio
Made by pultrusion with a protective surface veil. 70% glass fibre, 30% isophthalic polyester resin. Length tolerance: 0/+10/+20 mm. Coloured right through Sold per length Note: the RAL shade may vary from one productio
Operator, distributor or installer: request your access, approved within 24 working hours. Your level of service and your discount then apply to the whole catalogue.
